IN-SITU 100

In-Situ Water Level Meter 100 30m

In-Situ
Compare

$1,032.90

SKU: in-situ-water-level-meter-100-30m Category:

Product Description

Additional Information – Water-Level-Meter-Specs

The In-Situ Water Level Meter 100 is an economical model of the Water Level Meter 200, with a Kevlar-reinforced polyethylene tape and stainless steel conductors. This affordable water level tape offers long-lasting performance for well drillers, pump installers, and other service users.

With static and drawdown modes, the Water Level Meter 100 can take static level readings and then switch to drawdown mode to perform low-flow and pump tests. Additionally, the IP68-rated probe can be submerged in depths of up to 300 m (1,000 ft) to determine the bottom of the well.

Features:

  • Submersible stainless steel probe
  • Nylon or aluminum reels (for tapes longer than 150 m or 400 ft) mounted on sturdy polyurethane-coated steel frames
  • Available in metric or U.S. units in lengths up to 600 m (2,000 ft)
  • Accuracy to each millimeter or 0.01 foot
  • Breaking load over 45 kg (100 lbs)
  • DC to AC conversion prevents corrosion and mineral buildup on probe
  • Sensitivity dial filters out false signals from falling water
  • Removable, sealed electronics module
  • Security link protects tape by releasing the probe if it becomes stuck in the well

Benefits:

  • Gives you years of accurate use – High-strength tape reduces stretching, ensuring accurate readings over the lifetime of the meter. Corrosion-resistant probe and protected electronics prevent wear and tear. Built-in roller bar guards the tape from rough or jagged well casings.
  • Reduces the amount of equipment needed– With the switch of a button you can use the same meter for static and drawdown modes, so you’ll always have the right tool for the job.
  • Helps you finish projects faster – The integrated well hanger and roller bar save time and money by both protecting the tape and speeding up deployment. Flexible tape winds smoothly onto the reel and does not stick to wet surfaces and well casings, and vinyl-coated carrying handle is ergonomically designed for easy tape rewinding.

Specifications:

General
Construction Kevlar-Reinforced Polyethylene
Wetted Materials Polyethylene, Santoprene, Delrin, PVC
Width 1 cm (0.4 in)
Weight 0.63 kg per 30 m (1.4 lbs per 100 ft)
Labels Feet and tenths Meters and centimeters
Markings 1 mm (0.01 ft)
Break Strength 45 kg (100 lbs)
Certifications CE, WEEE, RoHS Compliant
Diameter 16 mm (0.625 in)
Length 13.5 cm (5.3 in)
Weight 87 g (3.1 oz)
Environmental Rating IP68
Pressure Rating Up to 500 psi
Wetted Materials Stainless Steel, Delrin
Safety Disconnect* 34 kg (75 lb)
Field Replaceable Yes
Reel
Tape Lengths 30 m, 100 ft 60 m, 200 ft
Width 36 cm (11 in)
Height 31 cm (12 in)
Reel Weight 2.3 kg (5 lb)
Power Management On/Off Switch
Power Source 9 volt Alkaline
Modes Static and Drawdown
Self Tests Probe Circuit Tester
Water Level Indicators LED and Buzzer
Sensitivity Control Variable Sensitivity Dial
Brake Adjustable
Well Hanger Integrated
Tape Guide Roller Bar