TRAMEX CONCRETE CMEX5 MOISTURE ENCOUNTER X5

The Concrete Moisture Encounter X5 detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material. The Concrete Moisture Encounter X5 determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear digital dial.

$1,440.00

Product Description

Additional Information – cmex5-us-07-20-rev1-0-concrete-moisture-encounter-x5-datasheet-web

CONCRETE MOISTURE METER FOR MEASURING MOISTURE CONTENT AND HUMIDITY IN CONCRETE FLOORS AND SLABS, WOOD AND BUILDING MATERIALS

WITH ACCOMPANYING BLUETOOTH APP

The Tramex Concrete Moisture Encounter X5 – CMEX5 is an instant, precise, digital, non-destructive moisture meter for measuring quantitative moisture content % in concrete floors and slabs using Gravimetric testing as a baseline. The CMEX5 also provides Carbide Method equivalent readings for concrete and other cementitious substrates as well as comparative readings for Gypsum and as per ASTM F2659. The CMEX5 features a built-in ambient RH sensor that measures Ambient Relative Humidity, Temperature, Dew Point, and Humidity Ratio (or Mixing Ratio) of the environment. A bayonet plug-in port allows for optional wood pin probes or Relative Humidity Probes. Bluetooth connectivity to the Tramex Meters App allows for visualization of readings and data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts.

 

This Concrete Moisture Encounter has 4 measurement modes:

  1. Non-destructive test (NDT) mode: The Tramex Concrete Moisture Encounter X5 is a non-destructive digital multi moisture meter for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline. The CMEX5 also provides Carbide Method equivalent readings for concrete and other cementitious substrates as well as comparative readings as per ASTM F2659.
  2. Hygrometer mode:  The built-in Ambient Relative Humidity Sensor measures Ambient Relative Humidity, Temperature, Dew Point, and Humidity Ratio (or Mixing Ratio) of the environment.
  3. Equilibrium Relative Humidity mode (optional plug-in probe): Using the optional plug-in Hygro-i2 RH probes, the Concrete Moisture Encounter X5 will measure Equilibrium Relative Humidity, Temperature, Dew Point and Humidity Ratio in structural materials. A structural material such as a concrete slab can be tested using the in-situ method or RH Hood methods (International Standards: ASTM F2170 & BS 8201, 8203, 5325). Relative Humidity Probes can also be used for ambient RH measurements within air spaces.
  4. PIN Meter mode (optional plug-in probe): The Concrete Moisture Encounter X5 becomes a resistance type meter and measures the percentage moisture content (%MC) of wood when used with the optional plug-in PIN meter. International wood standards or pre-programmed wood species can be selected. PIN meter mode can also be used for Drywall and WME (Wood Moisture Equivalent) readings for other materials.

SPECIFICATIONS

Size: 7.1″ x 3.4″ x 1.6″ (180mm x 85mm x 40mm)

Weight: 12.59oz (357g)

Construction: ABS Body

Power: 2 x AALR6 ALKALINE (included)

Display: Digital

Depth of penetration in concrete: approx. 3⁄4″ (20mm)

Measuring range:

Moisture content for Concrete: 0 → 6.9 %

Comparative for Gypsum floor screed: 0 → 12

CM Equiv Anhydrite/Concrete: 0→2.7 / 0→4.3

Reference scale: 0 → 100

Relative Humidity 0 → 99%

(with optional Hygro-i2 ® probe): Humidity accuracy: 0% → 99%RH +/- 2% @ 25°C / 77°F

Moisture content for wood (with optional wood pin probes): 5 → 30 %